• en
  • nl
  • fr
  • de
  • 12 volt Do it yourself!
  • en
  • nl
  • fr
  • de
  • Steps for installing the Garden Lights Switch Plus.

    You can connect the Garden Lights Switch Plus in several ways to your garden lighting.

    1. If you want to work with one zone, you can place the Switch between the transformer and the main cable.
    2. Do you want to control one part with the app? You can place the Switch Plus on a branch.
    3. If you want to create different zones, you will have to place a switch at every branch.

    1. Controlling all garden lighting in one single zone using the Switch Plus.

    - Detach the cable from the transformer
    - Connect the Switch Plus to the transformer
    - Connect the main cable to the Switch Plus

    2. Controlling just one part/branch with the Garden Lights app. This depends on the system you selected:

    The system with fixed connection points
    In this case you can connect the Switch Plus to the fixed connection point on which you want to create a branch. First connect the Switch Plus and then the additional cable to the Switch Plus.

    The Flex system
    To connect the Switch Plus to a branch, using the female Flex connector, connect this connector to the main cable. You connect the Switch Plus to the female Flex connector and connect the additional cable to the Switch Plus.

    3. Multiple zones and making branches in the garden. If you want to create multiple zones in the garden, you need an Switch Plus for every branch. You can use one Switch Plus per branch. So, you have to make a separate branch for every zone. This depends on the system you selected:

    The system with fixed connection points
    In this case you can connect the Switch Plus to the fixed connection point on which you want to create a branch. First connect the Switch Plus and then the additional cable to the Switch Plus.

    The Flex system
    To connect the Switch Plus to a branch, using the female Flex connector, connect this connector to the main cable. You connect the Switch Plus to the female Flex connector and connect the additional cable to the Switch Plus.

    Making use of the dark/light sensor
    The Switch Plus includes a built-in dark/light sensor. You can configure it in the Garden Lights app so that your lighting switches on when it gets dark and switches off at daylight. In order for this feature to work properly, you should take the position of the sensor into account when placing the Switch Plus. The sensor must be exposed to ambient light. Make sure the sensor is not exposed to interrupting light such as streetlights because this might interfere with optimal functioning of the sensor.

    Resetting the Switch Plus to factory settings
    The reset button is located on the back of the Switch Plus. It allows you to reset the Switch Plus to factory settings. This button can be used in case of malfunctioning, or if you forgot the password you created using the app. Please follow the steps below to reset the Switch Plus to factory settings:
    7. Verify if the Switch Plus is plugged in. The green indicator light on the Switch Plus should be visible.
    8. Push and hold the reset button for at least six seconds
    9. Wait a few seconds before releasing the button
    10. The green indicator light flashes twice after which it stays on permanently. The Switch Plus has been reset to factory settings successfully.
    11. In case you connected the Switch Plus with the app before: remove the Switch Plus from your network (app). Navigate to menu more -> Change product -> click on the Switch Plus and then click remove.
    12. Connect or reconnect the Switch Plus to your network. In the app, navigate to menu more -> Add product, or select New network on the startup screen.